Designed for demanding M2M applications such as automatic meter reading, SMS messaging, or a communications link for data loggers and associated monitoring equipment.
Interfaces The unit is fitted with a DB9 RS232 serial port, a 6-pin RJ12 input for power and a USB-B connection that can also be used for serial communications. Power input can be 6 to 35VDC. Antenna connector is FME M via a 110mm (approx.) cable extending from the unit.
Frequency Bands – Penta-Band 3G The ETM9440-1 supports 5 frequency bands for 3G/UMTS / HSPA+ and 4 frequency bands for 2G/GPRS making it suitable for use across Australia and around the world.
Wide Operating Temperature Range Internally the ETM9440-1 Industrial 3G Serial Modem is fitted with the Cinteron PH8-P Cellular Wireless module from Gemalto, the PH8-P is an industrial grade module making the product suitable for operation from -30 to 70°C.
SMS The ETM9440-1 can be used to send SMS messages, from a server or PLC, by using the units AT interface in either Text or PDU mode, Tesxt mode being most common.
TCP/IP TCP/IP stack access is via AT commands
CSD The unit support CSD (Circuit Switched Data) commonly used for remote access to legacy equipment.
Part Number: ETM25000M05
ETM ANTENNA OPTIONS: ETM Pacific stocks a range of cellular and RF M2M antennas as well as extension cables and RF adaptors. Please see antennas.
POWER SUPPLIES FOR ETM MODEMS: ETM9140 and ETM9440 modems have an RJ12 power connection as standard, ETM Purple2 4G AUS modems have a single combined RJ45 power.
CABLES FOR ETM MODEMS: ETM Pacific stocks a range of interface, power and IO cables for use with ETM9140, ETM9440 and ETM Purple2 4G AUS modems, please contact us for more info.
Give us a call or leave a message, we endeavour to answer all enquiries within 24 hours on business days.