Datasheet User Guide
Digi Connect Sensor is a fully integrated, battery powered cellular gateway with I/O for connecting to a wide range of external sensors. Designed to work in rugged industrial environments, the Connect Sensor is the ideal solution for companies looking to add remote monitoring and diagnostics in places where power is not easily available. Its easy installation, reliability and low data usage make remote monitoring possible in areas where it was previously cost prohibitive.
Local protocol support allows the Connect Sensor to communicate with Modbus sensors and capture sensor diagnostics along with data. This enables users to not only monitor their data but also remotely diagnose the health of their sensors.
Digi Connect Sensor leverages Digi Remote Manager® , enabling customers who need to monitor large numbers of sensors to easily integrate that data into existing applications or work with third-party applications.
Digi Connect Sensor works with Digi Connect Wizard. This smartphone application is the first of its kind for this type of battery powered gateway. It gives local installers, technicians or drivers instant feedback of sensor values over Bluetooth.
CSENSE-A210 Connect Sensor+, Verizon LTE CSENSE-A310 Connect Sensor +, AT&T and T-Mobile LTE CSENSE-A710 Connect Sensor+, Global 3G/2G
Digi Connect Sensor+ WWAN 2G BANDS GSM 850, GSM 900, DCS 1800, PCS 1900 3G BANDS FDD B1, B2, B4, B5, B8 LTE CATEGORY 1 Verizon: Bands 2, 4, 13 AT&T, T-Mobile: Bands 2, 4, 5 with 3G/2G fallback ANTENNA CONNECTOR External SMA SIM SLOTS 1, Standard size MANAGEMENT CONFIGURATION AND MANAGEMENT Digi Remote Manager/Local USB to Serial CLI POWER (Does not include power draw of external sensors) EXTERNAL POWER INPUT RANGE 8 VDC to 30 VDC BATTERY AND BATTERY LIFE 7.2 V, 14.5 Ah, Lithium thionyl chloride, non-rechargeable, replaceable; Approximately 2 years (@ 2 reads/transmits per day) POWER DRAW, SLEEPING 86.4 uW POWER DRAW, CONTINUOUS MONITOR 400 mW POWER DRAW, PEAK TRANSMIT 14.4 Watts SENSOR PROTOCOL SUPPORT MODBUS MODBUS RTU AND ASCII, Connect to up to 4 devices ANALOG I/O INPUTS 4, Configurable as 4/20 mA or 0-10 VDC Analog inputs INPUT VOLTAGE RANGE 0-10.5 V (Analog input) INPUT CURRENT RANGE 4-22 mA (Current loop input) INTERNAL A/D CONVERTER 12 bit DIGITAL I/O PORTS 1 digital I/O or pulse counter input INPUT RANGE 0-0.6 VCD logic low; 2.2 V-30 VDC logic high MAX INPUT VOLTAGE 30 VDC MAX PULSE COUNT FREQUENCY 2 KHZ DIGITAL OUTPUT Open collector output, max sink current 450 mA OUTPUT POWER PORTS 5 OUTPUT VOLTAGE OPTIONS 3.3, 5, 15, 24 VDC MAX CURRENT OUTPUT 200 mA ENVIRONMENTAL OPERATING TEMPERATURES -35˚ C to +70˚ C STORAGE TEMPERATURE -40˚ C to +85˚ C RELATIVE HUMIDITY 90% BATTERY DISCHARGE <1%/year if stored at +30˚ C PHYSICAL DIMENSIONS (L x W x H) 152.4 mm x 108.4 mm (127 mm including glands) x 74.6 mm WEIGHTS 264 g LEDS INDICATORS Battery, cellular, sensor and bluetooth ENCLOSURE Lexan/IP66 REGULATORY APPROVALS SAFETY UL60950-1, CAN/CSA C22.2 No. 60950-1-01, IEC 60950-1:2005 (Second Edition); Am1:2009 + Am2:2013, EN 60950-1:2006 / A11:2009 / A1:2010 / A12:2011 / A2:2013 and EN 60950-22:2006; Class 1, Division II, groups A,B,C,D; ANSI/ISA 12.12.01:2015,CAN/CSA C22.2 No 213-15, 1st Ed ATEX EN 60079-0:2012+A11:2013, EN 60079-15:2010, eII 3 G Ex nA nC IIC T6 Gc EMISSIONS FCC part 15 Subpart B class B, EN55022: 2010/AC: 2011 class B, IECS-003 Issue 5: 2012 class B IMMUNITY EN55024:2010 WARRANTY PRODUCT WARRANTY 3 years + Digi Foundations*
Digi Connect Sensor IO Wiring Guide
– Weatherproof enclosure with wide temperature range makes it ideal for use in all environments – Configurable read and report intervals with threshold and delta alarms – Multiple configurable I/O make it possible to connect to multiple sensor types – Modbus protocol support – External, configurable power outputs eliminate the need for sensor power supplies – Global cellular coverage
Give us a call or leave a message, we endeavour to answer all enquiries within 24 hours on business days.